Nikon XT100 - Manual (Page 47)

47
12.
O
PTIONAL
AUTO
MODE
each stop of the turntable in any point of
photography.
A complete series of pictures will be obtained
in this manner.
The digital display on the control panel shows
the frame number. The moment of photogra
phy of each frame is accompanied with
sound indication (XT 350 only).
The set parameters will be retained after the
turntable is switched off.
NOTE: In Auto Mode the turntable synch ca
ble connected to «M» jack may be removed
as it is not used. However, the connected
synch cable won’t affect the turntable opera
tion in Auto Mode.
to contents