Nikon XT100 User Manual
Page 41
41
that the rotating surface of the turntable
will move to the next frame. Indication of
the digital display located on the control
panel will increase by one.
6.If required the bad shot may be taken
again. With this aim press the other button
control rotation on the remote control. The
turntable will go back to the previous shot
position. Take the picture. Then press the
first rotation controlling button to resume
the movement of the turntable in the previ
ously set direction.
6. Take the next picture after the rotation has
ceased.
7. Depress the button on the remote control
once again and take the pictures one by
one in each point of photography until ro
tation is completed. Indication of the digital
display on the control panel should coin
cide with the set number of frames in the
series. The moment of photography of
each frame is accompanied with sound in
dication (XT 350 only).
Figure 10.6