Nilfisk-Advance America Sweeper SR 1700D 2W D - Manual (Page 40)

USER MANUAL
2 33014815(1)2005-07 A
INTRODUCTION
FOREWORD
This manual comes with the machine and should be kept until
end of life.
Before carrying out any operations with or on the machine
read all the instructions and warnings in this manual.
Unauthorized operators unfamiliar with the procedures
contained in this manual should not use the machine.
Directive 98/37 EC and further updatings define that: an
“OPERATOR” as the person or people responsible for the
installation, functioning, setting, maintenance, cleaning,
repairing and transportation of the machine.
Nilfisk-Advance declines all responsibility for problems,
failures, accidents etc. due to lack of knowledge or application
of the procedures described in this manual.
The same applies to modifications and/or installation of
accessories carried out without advance authorization.
MACHINE IDENTIFICATION
The machine has the EC marking (Fig. A) as specified in
Machine Directive 98/37 EC and further updatings.
Any improvements or minor alterations in styling carried out
subsequently on the machine may result in a few details
which differ from the illustrated ones, but they do not
invalidate the descriptions in this manual.
USER MANUAL IDENTIFICATION
The User Manual is issued by Nilfisk-Advance and comes
with the machine.
By law the User Manual, together with all the mentioned or
enclosed documentation, can not be reproduced or
transmitted to third parties without the manufacturer's
authorization.
The User Manual gives a detailed description of machine
procedures from transportation to scrapping.
Nilfisk-Advance, committed to continual product development
and quality improvement, reserves the right to modify the
details contained in this manual at any time and without prior
notice.
GENERAL WARNINGS
This chapter contains a few warnings to ensure correct
machine use and to avoid injury to operators and material
damage.
These warnings which should be thoroughly understood in
order to carry out the operations correctly will be explained
into details in the relevant chapters.
It has been decided to use few but clear warning signs for
quick and easy consultation.
These operations can cause slight or serious physical
injuries, including death.
Proceed with the operations being carried out only if the
instructions highlighted by this symbol are followed carefully.
These operations should be carried out correctly to avoid
injury or material damage.
Proceed with the operations being carried out only if the
instructions highlighted by this symbol are followed carefully.
USER MANUAL
Purpose
The purpose of the User Manual is to give the operator all the
necessary information to use the machine correctly and to
keep it in perfect working order with maximum safety.
Safe-Keeping
In order to safe-keep the User Manual:
–
take care of the manual to prevent it from being
damaged;
– do not remove, add or rewrite any part of this manual;
– store the manual in a dry place;
– give the manual to any other operator or future owner of
the machine.
NOTE
Use address or telephone number shown on
the plate to order spare parts or to contact
Nilfisk-Advance.
WARNING!
This symbol highlights operations which are
potentially hazardous for the operator.
NOTE
Operations needing particular care have been
highlighted with this symbol.