Nilfisk-Advance America Sweeper SR 1700D 2W D - Manual (Page 51)

USER MANUAL
33014815(1)2005-07 A 13
CLEANING AND MAINTENANCE
The machine cleaning can be carried out by non-specialized
personnel. However, the person in charge of the cleaning
should be familiar with the energy source cut-off main
controls and the main features of the machine to avoid any
dangerous situation.
The machine maintenance should be carried out by highly
skilled personnel, with a deep knowledge of the machine and
its components.
Mechanical, electrical and electronic maintenance is
possible.
CLEANING
Machine general cleaning
Clean the coating, panels and controls of the machine with a
soft cloth, either dry or lightly soaked in a mild detergent
solution.
Remove traces of dust and other dirt from the machine control
panels (digital displays, indicator and warning lights,
switches).
If necessary, the electrical components should be cleaned
only by specialized personnel and non-corrosive products
suitable for electric circuits should be used.
PERIODICAL MAINTENANCE
For the engine maintenance, please follow the instructions
provided in the Use and Maintenance Manual concerning the
engine installed on the sweeper. This manual comes in a
special case.
Recommended periodical maintenance operations are
summarized in this table.
MAINTENANCE TABLE
WARNING!
Any cleaning and maintenance operation
should be carried out with the machine off.
Wait for all the parts to stop and cool down.
WARNING!
Protect eyes and hair when cleaning the
machine with compressed air guns.
If the machine is working in a toxic
environment, wear a special mask and
adequate protective clothing when carrying
out maintenance work on the dust filter.
NOTE
Do not use solvents such as alcohol, petrol or
ethyl acetate as they could damage the
surfaces.
NOTE
Pay attention when cleaning the electrical
components.
WARNING!
Any cleaning and maintenance operation
should be carried out with the machine off.
Wait for all the parts to stop and cool down.
Maintenance
Every 10
hours
After 50
hours
Every 150
hours
Every 300
hours
Every 500
hours
Every
1,000
hours
Every
2,000
hours
Engine oil level check
Hydraulic oil level check
Dry air cleaner cleaning
Water radiator cleaning
Closed pocket filter cleaning
V belt check
Cooling line check
Brake fluid level check
Battery check
Dust control system water filter check
Water drain nozzle from fuel filter cleaning
Radiator cleaning
Fuel pump filter cleaning
Engine oil change
Oil filter element replacement
Gear pump hydraulic oil filter replacement