Navigon 2090S - Manual (Page 28)

Getting Started
Installing the Car Cradle
12 NAVIGON 2000S | 2200T Series User’s Guide December 2008
NAVIGON, INC. Version 1.1
Placing the Navigation Device in the Cradle
The holder has two small projections on the bottom and one on the top. These projec-
tions are designed to fit into corresponding slots on the bottom and top of the
NAVIGON device.
1. Insert the navigation device into the holder by aligning the bottom projection slots
on the bottom of the device.
2. Press the device towards the cradle until you hear the upper clip latch into place.
3. Adjust the navigation device so that it can be seen easily.
Powering the navigation device
Included with the NAVIGON device is a car charger cable with which power can be
supplied to the navigation device using the vehicle's cigarette lighter or power outlet.
The car charger cable is connected to the NAVIGON device using the power connec-
tion port (Power) on the bottom of the device.
Caution! The car charger cable is to be connected to cigarette lighters with an operat-
ing voltage of 12V only.