Nortel Networks RTU-292 - Manual (Page 68)

RTU-292 Operations Manual
When a command is sent to the RTU-292 it is buffered up and acted on as soon as possible.
Once the command has been executed, the RTU-292 will return a "Status" response. The
format of this status response is explained in greater detail in the section 5.4, "Status Returned
From The RTU-292". The RTU-292 is designed to act on one command at a time. The user
must wait for a response from a given command before entering the next command.
Table 5-1 Command Summary
Null Command <CR> …………………………………….
Auto Answer Command AUTO_ANS <ON|OFF|?> <CR> …….
Audible Ring Command AUD_RING <ON|OFF|?> <CR> ……..
Date Command DATE <ddmmyy> <CR> ………………
Dial Command DIAL <OPER|LP|number string> <CR>
Disconnect Command DISC <CR> …………………………….
Generate DTMF command +DTMF <number string> <CR> ……….
Handset Phone Command HS_PH <ON|OFF|?> <CR> ………….
Handset Radio Command HS_RAD <ON|OFF|?> <CR> ………..
Speaker Phone Command SPKR_PH <ON|OFF|?> <CR> ………
Speaker Radio Command SPKR_RAD <ON|OFF|?> <CR> …….
Speed Dial Command SD <nn|ALL> <num|.|?> <CR>
Tel-Line Phone Command TEL_LINE_PH <ON|OFF|?> <CR> ….
Tel-Line Radio Command TEL_LINE_RAD <ON|OFF|?> <CR> ..
Time Command TIME <hhmmss> <CR> …………..…
Software Version Command VER <CR> ………………………………..
JPS Communications, Inc. 5-2