Speaker phone command, Speaker radio command, Speaker phone command -7 – Nortel Networks RTU-292 User Manual
Page 73: 11 speaker, Radio, Command -7, 292 operations manual
RTU
-292 Operations Manual
5.3.10 Speaker Phone Command
SPKR_PH <ON|OFF|?> <CR>
This command is to enable, disable or query the current status of the Speaker Phone path.
Expected Response: Speaker Phone Response.
Examples:
SPKR_PH ON <CR> ; Command to enable the Speaker Phone path.
%SPKR_PH ON E0 <CR> ; Status returned showing that the Speaker Phone path is enabled.
SPKR_PH ? <CR>
; Command requesting the status of the Speaker Phone path.
%SPKR_PH OFF E0 <CR> ; Status returned showing that Speaker Phone is disabled.
5.3.11 Speaker Radio Command
SPKR_RAD <ON|OFF|?> <CR>
This command is to enable, disable or query the current status of the Speaker Radio path.
Expected Response: Speaker Radio Response.
Examples:
SPKR_RAD ON <CR> ; Command to enable the Speaker Radio path.
%SPKR_RAD ON E0 <CR> ; Status returned showing that the Speaker Radio path is enabled.
SPKR_RAD ? <CR> ; Command requesting the status of the Speaker Radio path.
%SPKR_RAD OFF E0 <CR> ; Status returned showing that Speaker Radio is disabled.
JPS Communications, Inc.
5-7