National Mower 68 DL - Manual (Page 11)

NATIONAL 68 SR & DL TRIPLEX ®
11
68OM-06/03
CAUTION
Note: Claims for shipping damages must be noted by the
consignee at the point of destination and filed with the
transportation company that delivers the shipment.
CAUTION
3. Unbolt Seat (3) from crate bracing and lay seat aside
for installation later.
4. Lift Rear Cutting Unit (4) off the crate supporting
members and set aside for later attachment.
5. Make sure Wing Cutting Units (5) are in their upright
positions, secured to the mower frame with Wing
Cutting Unit Latches.
6. Knock down all sides of crate and remove. Roll
mower backwards off of crate base.
UNCRATING INSTRUCTIONS
RECEIPT OF SHIPMENT
Carefully inspect your machine and crate for damage that
could have occurred during shipment. If damages or
shortages are noted, have the transportation company’s
representative note this on the bill of lading.
In order to prevent possible damage to the machine or
personal injury, the following uncrating procedure must
be followed:
1. Position Crate (1) on a hard, level surface.
2 Cut and remove all Steel Banding (2). Remove the
entire top of the crate.
CAUTION
Wear protective gloves. Steel
banding is sharp. Handle cutting
units carefully. Reels rotate freely
and are very sharp.