Nikon L12 - Manual (Page 50)

38
An
ti-s
h
ake Mode
Anti-shake Mode
Shooting in Anti-shake Mode
For anti-shake mode, press F when the camera is in the auto mode, scene
mode, movie mode and one-touch portrait mode. Anti-shake mode reduces
the effects of camera shake and blurred subjects, and produces clear images.
This mode reduces blur when shooting subjects in motion. Use it to freeze
wildflowers swaying in the wind, or combine it with the zoom to capture a
person’s natural expression.
• When this mode detects camera shake, [VR] (vibration reduction) (c 100)
and [BSS] (best shot selector) (c 82) are enabled. VR compensates blurred
images.
• The higher sensitivity is set and the shutter speed will be faster than in L
(auto) mode.
• Flash mode and self-timer are set to off.
1
Press F.
The camera enters anti-shake mode. Press again to
return to the shooting mode selected with the mode
selector.
2
Frame the subject and take the
picture.
While the shutter-release button is held
down, the camera takes a maximum of ten
shots. They are then compared and the
sharpest picture (the picture with highest
level of detail) is saved.
j
Notes on Anti-shake Mode
• Shutter speed is limited to a certain value for dark subjects.
• Pictures taken in this mode may become somewhat grainy.
• Even if [Date imprint] (c 98) is enabled, the date will not be imprinted.
j
BSS
BSS may not produce the desired results if the subject moves or the composition changes
while the shutter-release button is pressed all the way down.
l
Image Mode in Anti-shake Mode
When m is pressed in anti-shake mode, the menu is displayed to enable set the image
mode (c 77). Changes made to these settings apply to all shooting modes.
ON
12 12 12