Nikon L12 - Manual (Page 80)

68
Connecting to a Printer
C
onnecting
to
Te
le
visi
ons,
Co
mput
ers,
and Pri
n
ters
Connecting the Camera and Printer
1
Set the USB option (c 64) to [PTP].
2
Turn the camera off.
3
Turn the printer on.
• Check printer settings.
4
Connect the USB cable as shown below.
5
Turn the camera on.
• When connected correctly, the PictBridge start-up
screen will be displayed in the camera monitor.
Then the print selection screen will be displayed .
j
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Do not pinch the connector cover between the camera’s USB connector and the USB cable
connector when connecting the cable to the camera.
USB
PTP
Mass storage
MENU Exit
ON/OFF
ON/OFF
PictBridge
Print selection