Nokia 6275i - Manual (Page 32)

M e s s a g e s
22 Copyright © 2006 Nokia. All rights reserved.
Keep in mind that each voice mail
service may vary. However,
it should look similar to the
following:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds,
press 1234, and press #.
Phone numbers with dialling
codes
You can insert special characters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dialling location.
Dialling codes instruct the receiving
system to pause, wait, bypass,
or accept the numbers that follow
them in the dialling string. To set up
dialling codes, do the following:
1. Select Menu > Contacts > Speed
dials .
2. Scroll to an (empty) speed dialling
slot, and select Assign .
3. Enter your mailbox phone number,
including the area code.
4. Enter any dialling codes as
necessary after the entered phone
number.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice (two times 2.5
seconds) after the voice mailbox
number: 2145551212pp.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages,
and select
OK .
6. Enter a name (such as voice mail),
and select OK .
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key in standby mode.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. When the desired code
appears in the display, pause briefly,
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions
p—Pauses for 2.5 seconds before
sending any numbers that follow
+—Replaced by the international
access code
w—Waits for you to press the call key
before sending the numbers or codes
that follow
Clear voice mail icon
To clear the voice mail icon from the
display, select Menu > Messaging >
Voice messages > Clear voice msg. icon .