Nokia 6275i - Manual (Page 58)

S e t t i n g s
48 Copyright © 2006 Nokia. All rights reserved.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
Hands-free operation
You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
Assign a voice tag to a
command
Before using voice commands, you must
first add a voice tag to the device
function.
1. Select Menu > Settings > Voice
commands .
2. Select the device function you
want to tag: Profiles , Messages ,
Infrared , Voice recorder , or Log .
3. If necessary, select an option
associated with that function.
4. Select Start , and speak the voice
tag clearly into the microphone.
Do not select
Quit unless you want
to cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with assigned voice tags.
Activate a voice command
After you have associated a voice tag
with a function in your device, to issue
a command, speak the voice tag.
1. In standby mode, press and hold
the right selection key or voice key.
2. With Speak now displayed,
pronounce the voice tag clearly into
the microphone.
With the voice tag found, the device
displays Found: , and plays the
recognised voice tag through the
earpiece. The function you requested is
activated.
Options
After you have associated a voice tag
to a command, you can select one of
the following options:
Play —Press the center selection key to
listen to the voice command tag.
Change —Select Options > Change to
change the voice command.
Delete —Select Options > Delete to
erase the voice command tag.
■ Connectivity
You can connect the phone to a
compatible devices using infrared (IR)
connection, or Bluetooth wireless
technology. You can also connect the
phone to a compatible PC using IR or a
USB data cable; and use the phone as a