Nokia 6275i - Manual (Page 54)

S e t t i n g s
44 Copyright © 2006 Nokia. All rights reserved.
Calling cards
If you use a calling card for long
distance calls, save the calling card
number in your phone. The phone can
store up to four calling cards.
Contact your calling card company for
more information.
Save information
1. In standby mode, select Menu >
Settings > Call > Calling card .
2. Enter your security code, and select
OK . See “ Security ”, p. 54 .
3. Scroll to the calling card of your
choice, and select Options > Edit >
Select > Dialling Sequence .
4. Select one of the following
sequence types:
Access+phone+card —Dial the
access number for the calling card,
the phone number, then enter the
card number (plus PIN if required).
Access+card+phone —Dial the
access number for the calling card,
card number (plus PIN if required),
then enter the phone number.
Prefix+phone+card —Dial the prefix
(numbers that must precede the
phone number) and phone number,
then enter the card number
(plus PIN if required).
5. Enter the required information
(access number or prefix and card
number), and select OK to confirm
your entries.
6. Select Card name > enter the card
name > OK .
Select a calling card
You can select one of the calling cards
for which you have saved information.
The selected card information is used
when you make a card call.
1. In standby mode, select Menu >
Settings > Call > Calling card .
2. Enter your security code, and select
OK . See "Security settings,"p. 80.
3. Scroll to the calling card of your
choice, and select it.
Make card calls
After you have selected a calling card,
make a card call.
1. Enter the phone number, including
any prefix (such as 0 or 1) that your
calling card may require when you
make a calling card call. See your
calling card for instructions.
2. Press and hold the send key for a
few seconds until Card call is
displayed.
3. Follow the instructions on the
screen.
4. When you hear the tone or system
message, select OK .