Nostalgia Electrics Retro RSM-650 - Manual (Page 5)

ENGLISH 3
2. Locate the locking tab on
top of the slush mixing
chamber lid (at the back
and directly opposite the
white Nostalgia Logo.)
(Figure B)
Pinch the tab together
while lifting up on the lid,
carefully unhinging the
front of the lid (at the
white Nostalgia Logo) as
you gently lift up.
(Figure C)
FIGURE B
FIGURE C
3. Lift the aluminum ice cylinder and
mixing mechanism/cylinder cage
out of the clear mixing chamber.
(Figure D)
FIGURE D
4.
Separate the mixing mechanism
from the cylinder cage by carefully
lifting and unsnapping the three
locking tabs triangularly located at
the top of the cylinder cage.
(Figure E)
FIGURE E
5. Prepare for your first use by thoroughly washing the clear mixing chamber, aluminum
ice cylinder, mixing mechanism and cylinder cage, in warm sudsy water. Rinse the
parts well, and thoroughly dry. DO NOT put the motor base in water.
6. To clean the motor base and lid when needed, use a clean non-abrasive damp cloth
to wipe the exterior, and then dry off with a clean, non-abrasive towel. (See Parts
Breakdown below).
7. Reassemble your RETRO VERTICAL SLUSH MACHINE, make sure that you have
securely latched the mixing mechanism to the cylinder cage and that the gear top is
inserted into the mixing chamber lid. Confirm that you have also latched the lid
securely to the clear mixing chamber.