Napco Security Technologies GEM-K1CA User Manual

Page 18

Advertising
background image

18

F U N C T I O N M E N U

Activate Telephone Test?

(Telephone Test programmed?

‰

YES

‰

NO).

Sends a

communicator test to the central station. A communication failure will be indicated
at the keypad by a system trouble “E03-FAIL TO COMM” display. Repeat the test
to attempt to correct a communication failure, as any successful communication
will clear this display.


Delay Arming 1-4 hours.
(Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours.

To Delay Arm the system:

With the function “TO ARM IN 1-4 HRS“ displayed in the window, e

nter the

desired Delay Arming time in hours (

1, 2, 3

,or

4

), followed by

U

.


At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing

C

, but it will turn

back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.

The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.

A C T I V A T E
D I A L E R T E S T Y / N

T O A R M I N 1 - 4 H R S
P R E S S 1 - 4 / N

Advertising