Easy exit, Emergency buttons – Napco Security Technologies GEM-K1CA User Manual
Page 9
9
AR M I N G S T AY : P R O T E C T I N G Y O U R S E L F AT H O M E
Easy Exit
(Optional - Easy Exit programmed?
YES
NO)
Your system may have been programmed for Easy Exit, which allows a user to exit the premises while the system is armed STAY. By
activating Easy Exit while the system is armed STAY, the Exit Delay countdown will take place, during which time you are permitted to
leave through the exit door. The Easy Exit Delay time will be identical to the Exit Delay time the system gives you each time it is
armed STAY. This will allow, for example, an early morning commuter to exit the house, without having to disarm and rearm the
system, awaking the family.
Press
U
to activate Easy Exit on your system.
(GEM-P3200/GEM-P9600 V20 or greater, GEM-P816/P1632 V9A or greater)
Emergency Buttons
(Only available if programmed)
The Blue Emergency Buttons (
7
,
8
&
9
), if programmed, are always active,
whether the system is armed or disarmed. The emergency signal will only be transmitted
when an Emergency Button and
G
are pressed at the same time.
•
Fire Emergency Simultaneously press
7
and
G
to alert the central station of a fire
emergency. *(Fire Emergency programmed? YES NO)
•
Auxiliary Emergency Simultaneously press
8
and
G
to alert the central station of
an Auxiliary emergency. *(Auxiliary Emergency programmed? YES NO)
•
Police Emergency Simultaneously press
9
and
G
to alert the central station of a
police emergency. *(Police Emergency programmed? YES NO)
STAY
AWAY
E
N
T
E
R