Nortel Networks N0035509 - Manual (Page 14)

Installing and configuring the Mobile Voice Client 2050
14
Installing and configuring the
Mobile Voice Client 2050
To install MVC 2050 on your PDA:
1. If you have an older version of MVC 2050 installed on your PDA, you
must remove it prior to installing a newer version. See “Removing a
previous version of MVC 2050” on page 14.
2. Place your PDA in its cradle.
3. Synchronize your PDA with a desktop PC running Microsoft
ActiveSync®. See “Connecting a PDA to a desktop PC using
ActiveSync” on page 15.
4. Install the MVC 2050 from a Desktop. See “Installing the MVC 2050
from a Desktop PC using ActiveSync” on page 16.
Removing a previous version of MVC 2050
If a previous version of the MVC 2050 is installed on your PDA, delete the
old version before installing the new one, or the installation fails. See
Figure 3 on page 15.
Use the following procedure to remove the MVC 2050 from your PDA:
1. Select Start from the Main Application screen. A drop-down menu
appears.
2. Select Settings . The Settings dialog box appears.
3. Select the System tab. The System dialog box appears.
4. Select Remove Programs . A list of programs appears.
5. Select Mobile Voice Client 2050 .
6. Select Remove . A dialog box appears, asking you to confirm this
decision.
7. Select Yes . A brief pause occurs while the PDA removes MVC 2050.
After the pause, a dialog box appears asking if you want to perform a
soft reset.
8. Select Yes . Your PDA restarts.