Nortel Networks N0035509 - Manual (Page 17)

Installing and configuring the Mobile Voice Client 2050
17
MVC 2050 configuration
Enable ClearType
The MVC 2050 uses a special screen font, which requires that
ClearType® be enabled on your PDA.
To enable ClearType:
1. From the PDA’s Main Application screen, select Start .
2. Select Settings .
3. Select Screen .
4. Select Enable Clear Type .
Automatic Gain Control
Since the MVC 2050 requires a headset to operate properly, disabling
Automatic Gain Control is sometimes necessary to attain optimum audio
quality.
Note: When the PDA is used in handsfree mode, without a headset,
the PDA microphone picks up sounds from the speaker, creating a
feedback loop. Automatic Gain Control is used in this instance to
avoid feedback. For further information about device hardware
settings, see your PDA Help system.
To disable Automatic Gain Control :
1. Select Start .
2. Select Settings .
3. Select System .
4. Select one of the following, depending on the PDA you are using:
a. Audio
b. Advanced Sounds
c. Microphone
5. Select Automatic Gain Control .