Nextel comm IDEN H69XAH6RR1AN - Manual (Page 38)

30
Direct Talk SM
Making and Receiving Code Calls in
Direct Talk
SM Mode
To make a code call using Direct Talk:
1 Press and hold the PTT button. DT Transmit
appears on the first line of the display. Begin
speaking after your phone emits the Direct Talk
tone.
2 Release the PTT button to listen.
The tone emitted from your phone when making a
Direct Talk call is 4 beeps and sounds different
from the standard tone heard with on-network
Direct Connect and Group Connect calls.
If you receive an error message:
• There may be no parties on your channel or
code.
• You are out of range.
When you receive a code call using Direct Talk, DT
Receive appears on the first line of the display.
Receive All
You can set your phone to receive Direct Talk
transmissions from any phone that is set to the
same channel, regardless of the code (1-15), by
setting the code to Receive All. When you receive
transmissions with the code set to Receive All,
the display changes from Receive All to the code
on which the transmission was received.
Note: You cannot initiate a code call when the
code is set to Receive All. If you press
the PTT button with the code set to
Receive All, you will receive an error
message.
To set the code to Receive All:
1 From the Direct Talk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press
A under Edit.
4 Select Receive All.
5 When you are finished, press
A under Back to
return to the idle screen.