Disabling the windows zero configuration utility, D in, Network connections and wireless security” in – NETGEAR WNDA3100 User Manual
Page 27: Chapter 2
2-1
v1.0, December 2007
Chapter 2
Network Connections and Wireless Security
This chapter explains how to use your Wireless-N USB Adapter to connect to your wireless local
area network (WLAN) and how to set up wireless security for the Wireless-N USB Adapter so that
it matches the wireless security settings for your network.
If you chose the Windows XP or Windows Vista Zero Configuration utility during installation, and
now you want to use the Smart Wizard, you must disable the Windows utility. If you are working
with the Vista configuration utility, see the NETGEAR online application note at:
Disabling the Windows Zero Configuration Utility
To disable the Windows Zero Configuration utility:
1. Attach the wireless adapter to a USB port for your computer.
2. In Windows, select Start > Network Connections.
3. Select Wireless Network Connection, right-click, and then select Properties.
4. Click the Wireless Networks tab. Then clear the Use Windows to configure my wireless
settings check box.
Figure 2-1