Setting up wep encryption security – NETGEAR WNDA3100 User Manual
Page 39
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
2-13
v1.0, December 2007
Setting Up WEP Encryption Security
Follow the steps below to configure WEP encryption security:
1. Run the WNDA3100 Smart Wizard.
a. Make sure that the WNDA3100 software is installed and the wireless USB adapter is
connected to the USB port in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab displays:
2. Configure the Security settings.
a. In the Profile field, select the profile or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
c.
In the Security section, select WEP.
Figure 2-10
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.