Sb-600's available flash modes, Available flash modes and usable cameras – Nikon Speedlight SB-600 User Manual

Page 32

Advertising
background image

32

The SB-600's available flash modes vary, depending on the cameras and
lenses in use or the camera's exposure mode. Using the TTL auto flash mode
is recommended for normal flash photography.

●

●

●

Available flash modes and usable cameras

Available flash mode

Usable cameras

i-TTL mode

Cameras compatible with CLS

D-TTL mode

Digital SLRs not compatible with CLS

TTL auto flash mode

TTL (film-based) mode

Cameras (film-based) in Groups I to VI (No

o

appears with cameras in Groups III and IV while
performing Balanced Fill-Flash)

Manual mode

Manual flash

No limitation

u Monitor Preflashes

The SB-600 fires a series of imperceptible Monitor Preflashes just before the
flash fires so that the camera can obtain necessary information on the subject.
This applies to situations when the SB-600 is used with cameras compatible
with CLS, digital SLRs not compatible with CLS and cameras in Group I with
a CPU lens, and the flash mode is set to TTL auto flash.

• Monitor Preflashes are fired instantaneously and cannot be differentiated from the

main flash.

• When Monitor Preflashes are fired,

H

appears on the LCD panel (when using a single

flash unit). For cameras in Group I, however, Monitor Preflashes are not fired when the
SB-600's flash head is adjusted to other than the horizontal/front position or the
camera's flash sync mode is set to rear-curtain sync, even when

H

appears on the

LCD panel.

SB-600's available flash modes

Advertising