Nikon SB 20 User Manual
Nikon
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- F-801/N8008+SB-20
- Zur Beachtung:
- Notes:
- F4/F4S+SB-20
- F-801/N8008-I-SB-20
- Notas:
- FOREWORD=
- NOMENCLATURE
- 41
- 12. Set power switch to STBY (standby ‘ position) to turn on SB-20.
- 14. Fully depress shutter ' release button to take picture.
- 2. Set aperture.
- 3 Lightly press camera shutter release ■ button.
- ^ Confirm whether the green in-focus ' indicator LED iights up, then fuliy depress the shutter reiease button.
- SETTING CAMERA SHUTTER SPEED
- DETERMINING APERTURE
- TTL Mode
- (for TTL Automatic Flash Exposure Control)
- A Mode (for Non-TTL Automatic Flash Exposure Control)
- 2_ Align film speed in use with film speed ' index.
- 3_ To read proper shooting distance range,
- ' set distance scale selector to letter shown in zoom indicator window.
- 4, Select appropriate aperture and set aperture index knob.
- Usable apertures/shooting distance range in A mode unit; m (ft)
- Exposure compensation in A mode
- M Mode (for Manual Flash Exposure Control)
- Align film speed in use ' with the film speed index.
- Choose and set aperture.
- Set light output selector to appropriate ' setting.
- 2, Determine and set proper iens aperture.
- Guide Number
- SETTING POWER SWITCH
- READY-LIGHT INDICATIONS
- SYNCHRO-SUNLIGHT FILL-IN FLASH PHOTOGRAPHY
- SYNCHRONIZATION WITH
- MOTOR-DRIVEN CAMERA
- MULTIPLE FLASH EXPOSURES
- MULTIPLE FLASH PHOTOGRAPHY
- AVOIDING ‘RED EYE”
- CLOSE-UP FLASH PHOTOGRAPHY IN TTL MODE
- TIPS ON SPEEDLIGHT CARE
- ABOUT BATTERIES
- ACCESSORIES
- SPECIFICATIONS
- NIKON CORPORATION