Ready-light warning functions – Nikon SB 20 User Manual

Page 51

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Ready-Light Warning Functions

To prevent errors, the ready-light inside the camera’s

viewfinder blinks in the cases listed below. When blink­

ing occurs, check the SB-20’s flash mode selector

setting, the camera’s shutter speed/mode selector set­

ting or film speed setting and adjust as necessary.

1) When SB-20 is set at TTL with cameras other than

Nikon F-501/N2020, F-401/N4004, F-301/N2000,
FA, FE2, or FG. Reset SB-20’s flash mode selector

to A or M.

2) When using the FA, FE2, or FG to perform TTL auto­

matic flash photography with the camera’s shutter
speed dial set at a mechanical setting (M250, M90

or B). Reset shutter speed dial to another shutter

speed setting. For M250, MOO or B setting, reset
SB-20's flash mode selector to A or M.

3) When performing programmed TTL auto or TTL

auto flash operation with a camera film speed set­
ting beyond the usable range. Use film within the

appropriate range for TTL auto flash photography

(ISO 25 to 400 with the F-401/N4004, FA, FE2 or

FG; ISO 25 to 1000 with the F-501/N2020 or F-301/

N2000). With the FA, ready-light also blinks when

the film speed setting on the oamera is near ISO 12.

Advertising