Nikon 58-104 User Manual
Sb-104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Nikon
- Speedlight Parts
- Main Features
- About this Manual
- CONTENTS
- Tips on Speedlight Care
- Checking 0-rings
- Removing and Reseating 0-rings
- Installing the Battery
- Function Selector
- Flash Mode Selector
- Basic Flash Photography with the Nikonos RS
- > Set the camera’s sync mode to any . desired mode.
- I The Speedlight’s function seiector i is set to “Standard.”
- The Speediight's fiash mode ■ selector is set to TTL.
- Power switch is ON.
- Set the focus mode on the Nikonos RS to “S” or “C”.
- Set exposure mode to aperture- priority auto exposure (A).
- Check the flash shooting distance range and to be sure that the ready- light is lit up to shoot.
- • Caution
- Caring for the SB-104 After Use
- standby Switch
- Alert Signal Lamps
- Ready-light blinks.
- ♦Note
- Moisture alert light blinks.
- Heat alert light blinks.
- Electrical alert light blinks.
- ♦Note
- Reading the Exposure Calculation Chart
- Basic Tips on Underwater Flash Photography
- Camera Slave (Cordless Remote Photography)
- Flash Slave
- Rear-Curtain Sync Photography
- Using the Flash Signal Function
- Optional Accessories
- Details on NiCd Battery Unit SN-104
- Tips on SB-104 Care
- Notes of Caution
- Do not subject the Speedlight to vibrations or shock.
- Do not jump into the water while holding the Speedlight.
- Do not subject the Speedlight to excessive heat.
- Prevent dirt, mud, sand, dust, water, salt, or other foreign matter from entering the Speedlight.
- Take care not to splash water into the battery chamber or onto the NiCd batteries.
- If the Speediight gets soiled...
- Never disassemble the Speediight.
- Carrying the SB-104
- Safekeeping the SB-104
- Notes of Caution
- Specifications