Camera slave (cordless remote photography), Important – Nikon 58-104 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Slave (Cordless Remote Photography)
When used with the Nikonos RS,
the SB-104 can release the
camera’s shutter upon being
activated from a remote location by
another Speedlight. The SB-104
detects the remote flash with its
built-in slave sensor, fires its flash
and releases the camera’s shutter
simultaneously. This is useful when
you want to photograph hard-to-
approach or shy subject.
■ Important
Use Speedlight SB-104 or SB-102 as the
flash activating unit. Camera Slave (cordless
remote photography) is possible only when
the SB-104 is used with the Nikonos RS.
1
Turn OFF the power switch on the
SB-104 connected to the Nikonos
RS, and set the function seiector
to 0 “Cordiess Remote.” Then
set the Fiash mode to any desired
position.
—The function selector does not work
when the power switch is ON.
I Set the Focus mode on the Nikonos
I RS to “P” and set the distance in
advance. Then set the Sync mode
and Exposure mode to any desired
position.
—Autofocus operation is not possible for
Camera Slave (cordless remote
photography).
48