Reseat the 0-ring into their channels, Note – Nikon 58-104 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Reseat the 0-ring into their
channels.
—Do not stretch the 0-rings too much. Be
sure that the 0-rings are not warped and
they go into the channel correctly.
♦Note
The SB-104 package includes an 0-ring set
(three large and small 0-rings, 0-ring
lubricant, and two screws). The 0-ring set
is also available optionally. Be sure to have
this set with you wherever you go with your
Speedlight.
13
Advertising
This manual is related to the following products: