If the speediight gets soiled, Never disassemble the speediight – Nikon 58-104 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Take care not to splash water
into the battery chamber or onto
the NiCd batteries.
When changing batteries, be sure not to
accidentaiiy spiash water into the battery
chamber or onto the NiCd battery unit
SN-104. if water has been spiashed, wipe it
away immediateiy. Nikon recommends
keeping the batteries in the piastic case
provided untii they are needed.
If a iot of water enters the battery chamber,
the moisture aiert iight wiii iight up and the
Speediight wiii stop working. Remove the
battery from the chamber and take the
Speediight to a Nikon service center with
the chamber’s cover open.
If the Speediight gets soiled...
Use a biower to remove dust first, and
then wipe the Speediight ciean with a soft,
dry cioth.
Do not use thinner, benzine, or other active
agents.
Never disassemble the Speediight.
Never disassemble or remodel the Speediight
if damaged.
The Speediight houses a high-voltage
circuitry which is very dangerous. Take the
Speediight to a Nikon service center if
damaged.
I
1
65