Standby switch, When the standby switch is on – Nikon 58-104 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
standby Switch
When the Standby switch is O N . . .
The power of the SB-104 is turned OFF automatically when the
flash is not operated for about 80 seconds after the SB-104’s power
switch is turned ON.
—The SB-104’s ready-light goes out. The SB-104 then automatically turns
ON the power (for about 80 seconds) about once an hour to keep the
flash ready to fire at any time.
When the power to the camera is turned ON (by pressing the
shutter release button slightly), the SB-104 power is turned ON
accordingly and becomes ready to fire.
—The SB-104 power is turned ON when its power switch is turned OFF
then ON again and becomes ready to fire as well.
37