Caring for the sb-104 after use – Nikon 58-104 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Caring for the SB-104 After Use
Wash the Speedlight with fresh water...
If the SB-104 Speedlight is stored without
having been washed after use under water
(especially in seawater), salt and other
foreign matter will stick to its parts,
possibiy causing corrosion or operation
failures. With the Speedlight’s cap closed,
wash the Speedlight thoroughly with fresh
water (do not use hot water). If the
Speedlight was used in salt water or
muddy places, submerge it in a sink or
other suitable vessel filled with fresh water,
and move all operating parts (such as
ievers and knobs) to remove any salt or dirt
from the gaps around these parts. It is
then a good idea to rinse the Speedlight
under running water.
Do not let water get into the sockets...
When washing the Speedlight, attach the
supplied sync socket cap to prevent water
from getting into the sync socket.
Drying the Speedlight...
When drying the Speedlight after washing,
do not subject it to flames or heat. Avoid
direct sunlight. Let it dry in a well-ventilated
area.
34