Nikon 58-104 - Manual (Page 20)

•Caution
• Be sure the shoulder joint is locked when
gripping the arm to carry the camera and
Speedlight after making settings. If it is not
locked, the camera may fall off when the
release button is pressed.
•When releasing the arm from the bracket,
undo the lock of the shoulder joint first
before pressing the release button.
12 Check to be sure the Speedlight
is facing forward and the correct
shooting distance has been set.
(1) The positioning marks on the SB-104
and wrist joint should match the
shooting distance.
A: 00
B: 1m
C: 0.5m
(2) The white positioning marks of the
arm, shoulder joint, and bracket should
all be aligned.
The above setting is made when the
Speedlight is attached to the bracket
and the shooting distance set at more
than 50cm (1,6 ft).
13 Test firing after completing the
connections
Slide the function seiector knob
to the test fire position before
diving.
—If the ready-light LED lights up again,
the Speedlight is ready.
—If the alert signal lamp blinks, see
page 39.
20