Napco Security Technologies GEM-DXRP1 - Manual (Page 35)

35
S Y S T E M T R O U B L E E R R O R C O D E S
Trouble
Indication
System Trouble
Condition
Action
E10-NN Keypad Response Failure Call installing company for service.
E11-NN Keypad Tamper A keypad has been removed from the wall. Call installing company for service if
problem cannot be repaired.
E12-NN Expansion Zone Module
Response Failure Call installing company for service.
E13-NN Expansion Module Tamper The cover has been removed from a zone expansion module. A problem has been
detected with an Expansion Module. Call installing company for service.
E14-NN Relay Board Response Fail-
ure NN= Relay Board Number. Call installing company for service.
E15-NN RF Transmitter Tamper Wireless Transmitter Tamper Cover removed. NN=Transmitter Number. Call installing
company for service.
E16-NN Wireless Receiver Jam A problem has been detected with the wireless receiver. Call installing company for
service.
E17-NN Receiver Tamper Condition Call installing company for service.
E18-NN KeyFob Transmitter Low
Battery The batteries (2) in the wireless KeyFob transmitter indicated are low and should be
replaced. The replacement battery is the #386 watch battery.
Warning: Replace batteries only with the same type as specified above. Use of another
battery may present a risk of fire or explosion. Do not recharge or disassemble battery, or
dispose of in fire.