Napco Security Technologies GEM-DXRP1 User Manual
Page 8
8
Bypassing Interior Zones
I
nterior Zones, when bypassed, allow free movement within the home while the
protection of armed perimeter zones is maintained. To bypass Interior Zones, press
E
and enter your User Code followed by
D
.
Your system may have provisions for two groups of Interior Zones. (Optional) (Interior Groups programmed?
YES
NO)
Press
E
, followed by
D
to Bypass Interior Group 1: [ ____________________________________ ]
•
Press
E
twice followed by
D
to Bypass Interior Group 2: [ ______________________________ ]
(GEM-P9600 Only)
•
Press
E
three times followed by
D
to Bypass both Interior Groups 1 & 2.
Automatic Interior Bypass
(Optional - Automatic Interior Bypass programmed?
YES
NO)
Your system may have been programmed for Automatic Interior Bypass, which allows it to recognize that you have armed the
system and remained in the house, prompting it to automatically adjust the interior protection accordingly.
•
If you arm the system and remain in the house, all Interior Zones are automatically bypassed. The keypad will display
“BYPASSED” indicating that it is safe to move about.
•
If the system is armed and you leave, the Interior Zones will unbypass, providing complete interior protection.
Instant Protection
When retiring for the evening, after all family members are home, you can cancel the
entry delay on the Entry Zone(s). To arm with instant protection, press
F
just prior
to arming, or at any time after the system is armed. When armed with Instant Protection opening the entry door will cause an
immediate alarm.
•
When arming with Instant Protection, the exit delay will remain in effect, allowing exit of the house just after arming. While
armed, the window will display “SYSTEM ARMED” (“SYSTEM ARMED I” will display with the GEM-P9600/3200) and the
red ARMED light will flicker rapidly to indicate instant protection.
P R O T E C T I N G Y O U R S E L F W H I L E O N T H E P R E M I S E S
BYPASSED
S Y S T E M R E A D Y
S Y S T E M A R M E D I