Nortel Networks 3456 - Manual (Page 23)

- 23 -
Feature overview
Nortel Communication Server 1000
IP Softphone 3456 User Guide
NN43080-100 01.02
6.0 12 June 2009
Copyright © 2009 Nortel Networks
4 Enter the full name and phone number of the quick transfer contact.
Note: To set this contact as the Default quick transfer contact (the number
that calls are forwarded to if you click on the Default Transfer button
), select the check box. The default contact will appear with a checkmark
next to it in the list of quick transfer numbers.
5 Click OK.
6 The new contact is displayed in the quick transfers list. Click OK to finish.
Quick Transfer List Transfers
To perform a transfer using a number from your quick transfers list:
1 Answer the call by pressing .
2 During the call, press the drop-down menu button located just to the right
of the Default Transfer button
(the default transfer button only
appears on phone display when an active call is in progress).
Note: To send the call directly to your default quick transfer contact, just
press the Default Transfer button.