NEC Express 320Lc-R - Manual (Page 129)

6-10 Troubleshooting
<For on-board >
- Status emb-82559 10/100 Enet Adapter
- Status emb-82544GC Copper Gigabit Adapter
<For option board >
- Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
- Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
- NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
You will then see the dialog box on the right of this paragraph. This is because one of two
teamed adapters constituting dual configuration is removed.
Click [Yes], to remove the adapter from Team.
Remove the other adapter in the same way.
<For on-board >
- Status emb-82559 10/100 Enet Adapter
- Status emb-82544GC Copper Gigabit Adapter
<For option board >
- Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
- Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
- NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
4) Right click [Team #1:Adaptive Fault Tolerance Mode] and select [Remove].