NEC Express 320Lc-R - Manual (Page 135)

6-16 Troubleshooting
9. Start Device Manager, choose [View] then [Device by connection] and do the following:
a) Delete the red-circled device entries in the following figure.
IMPORTANT: Do not uninstall entries for “Stratus Fault Tolerant 69000 Video”
which appears as child entries of “ACPI Multiprocessor ftServer”.
Delete the following device entries:
- StratusDual Initiated Disk Device
- StratusDual Initiated Disk Device
- Stratus Fault Tolerant 69000 Video
- ! Unknown Device
a-1. Select the device and right-click. Choose [Uninstall].
a-2. After the [Confirm Device Removal] dialog box displayed, confirm the device
name and then click [OK].
10. When the option board is connected, perform the following operations for each option.
Use the CD-ROM you used in step 5 and perform these operations:
a) When N8804-001P1 (100BASE-TX Adapter) is connected
a-1. Execute [Command Prompt].
a-2. Run the following command from Command Prompt and move to CD-ROM
drive.
C:\> CD-ROM drive:
a-3. Run the following command from Command Prompt and move to the folder with
the batch file.
CD-ROM drive:\> cd \WINNT\DOTNET\EN
a-4. Run the following command from Command Prompt for updating the driver.
CD-ROM drive:\WINNT\DOTNET\EN> N8804001.BAT