NEC Express 320Lc-R - Manual (Page 47)

Windows Setup 4-3
Run [Setup] from NEC EXPRESSBUILDER top menu
Prepare for Windows Server2003 Enterprise Edition installation
and ft control software installation
Step 3: Disable Boot Monitoring Function (P.4-11)
Step 2: Prepare for ft series Setup (P.4-6)
Step 1: Things Required for Setup (P.4-4)
Step 11: Enable Boot Monitoring Function (P.4-48)
Setup completed
Step 13: Back up System Information (P.4-57)
Step 12: Set up Failure Management (P.4-48)
- Set memory dump (debug information)
- Set Dr. Watson
- Install a network monitor
- Set MTBF type
Step 10: Set Network for NEC ESMPRO Agent (P.4-45)
Step 9: Create Volume (P.4-44)
Step 8: Connect and Configure Options (P.4-43)
Step 7: Update Software (P.4-43)
Step 6: Set Dual Disk Configuration (P.4-34)
Step 5: Set Dual LAN Configuration (P.4-31)
Agree to the terms of software license
Enter user name and company name
Windows Setup Wizard starts
Enter the product ID of Windows Server 2003
(Unnecessary when OS’s Backup CD-ROM is used)
Insert Windows Server 2003 Enterprise Edition CD-ROM in the
CD-ROM drive
Specify the size of the partition for OS installation
Copy OS module to hard disk
Select language for HotFix
Automatic installation starts:
Windows Server 2003 Enterprise Edition
ft control software
NEC ESMPRO Agent
Setup Flow
The following flow-chart illustrates
the flow of the setup procedures for
the NEC
Express5800/320Lc/320Lc-R server.
Corresponding page numbers are
shown in parentheses.
: Entered or selected by the
user
: Proceeds automatically
Step 4: Starting the ft series Setup (P.4-16)