Netcom NB5 - Manual (Page 49)

Advanced
YML717 Rev1 NetComm NB5 Ethernet/USB Modem Router
www.netcomm.com.au 49
Select the Quality of Service [QoS] type; if in doubt leave as default.
Clip Settings: IP Address, Mask and Default Gateway: Provided by ISP
ARP Server: Leave as Default [0.0.0.0] unless advised by ISP.
Modifying or Deleting a Saved Connection
To modify a previously-defined Connection Profile, select WAN Setup>Connection. Click on the
Connection Name that you wish to modify or delete. Follow the procedures outlined in the relevant
section above to modify the connection, or click 'Delete' to delete a connection.
To save changes or to make the deletion permanent, click on Save Settings on the left.