Netcom NB5 - Manual (Page 66)

Advanced
NetComm NB5 Ethernet/USB Modem Router YML717 Rev1
66 www.netcomm.com.au
Enable Access Control: check this box to enable selective access from the WAN to your LAN for
applications of the class indicated by the relevant check boxes. If Access Control is not enabled, the
individual check boxes cannot be checked.
If Access Control is enabled, and an Enable WAN checkbox is selected, then WAN access to the
matching service is enabled. In other words, for example, if your were to enable Telnet access on the
WAN you could then manage and configure your NB5 from anywhere on the Internet via Telnet.
Caution: Enabling WAN access to the NB5 reduces security…
IP Access List: This enables you to specify which LAN/WAN IP addresses are allowed access to the
NB5 configuration services specified.