N-Tron 708FX2 - Manual (Page 2)

® 2008 N-TRON Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identifi cation purposes only and
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. Printed in USA.
REV 080630
Specifi cations
Switch Properties
Number of MAC Addresses: 8000
Aging Time:
Programmable
Latency Typical: 2.9
µs
Switching Method: Store-and-Forward
Physical
Height:
2.26" (5.74cm)
Width: 6.37" (16.18cm)
Depth (incl. DIN Rail Mount: 4.70" (11.94cm)
Weight (max):
1.65 lbs (0.75kg)
DIN-Rail Mount: 35mm
Electrical
Redundant Input Voltage: 10-30
VDC
Input Current (max): 330mA max @24VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3 A @24V)
Environmental
Operating Temperature:
-40 o C to 85 o C
Storage Temperature: -40 o C to 85 o C
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounted)
Shock:
200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF:
>2 Million Hours
Network Media
10BaseT:
>Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX
Multimode:
50-62.5/125µm
100BaseFXE
Singlemode:
7-10/125µm
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL 36609 USA
6330 Cham / Zg Switzerland
TEL: (251) 342-2164 TEL: +41 41 7406636
FAX: (251) 342-6353 FAX: +41 41 7406637
Website: www.n-tron.com
Email: [email protected]
708FX2 Industrial Ethernet Switch Ordering Information
708FX2-XX Six 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports
708FXE2-XX-YY Six 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports
NTPS-24-1.3 N-TRON Power Supply - (1.3 Amp @ 24VDC)
Where: XX = ST or SC, YY = 15, 40 or 80 for Singlemode, Blank for Multimode
E = Singlemode, and Blank Otherwise
Regulatory Approvals
FCC Title 47, Part 15, Subpart B - Class A
CE: EN61000-6-2, 4, EN55011, EN61000-4-2, 3, 4, 5, 6, 8, 11
UL Listed ANSI/ISA-12.12.01-2000 (US & Canada)
Class I, Div 2, Groups A, B, C, D, and T4A
ICES-003 - Class A, ATEX Zone 2, Category 3G,
II 3G Ex nC IIC (DEMKO 03 ATEX 0316686U)
GOST-R Certifi cation, RoHS Compliant, Submitted for
type approval from ABS for Shipboard Applications
Designed to comply with: IEEE 1613 for Electric Utility
Substations, and NEMA TS1/ TS2 for Traffi c control
Contact Information
2km* 15km** 40km** 80km**
-19dBm -15dBm -5dBm -5dBm
-32dBm -29dBm -34dBm -34dBm
1310nm 1310nm 1310nm 1550nm
100 Mb Fiber Transceiver Characteristics
Fiber Length
TX Power Min
RX Sensitivity Max
Wavelength
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
Connectors
10/100BaseTX:
Six (6) RJ-45 Copper Ports
100BaseFX: Two (2) SC or ST
Fiber Duplex Ports
Recommended Wiring Clearance
Front:
4" (10.16cm)
Side: 1" (2.54cm)