Configuring the led indicator (4075 only), Configuring the led – Nortel Networks Nortel 4075 User Manual
Page 158
Telephone settings
158
Configuring the LED Indicator (4075 only)
Use the information in this section to configure the LED indicator that
appears to the left of the speaker on the DECT 4075 handset. For more
information, see
“LED indicator (4075 only)” (page 33)
Use the following steps to configure the LED indicator:
2. Press the
Up
or
Down
key to highlight the
Shortcuts
option.
3. Press the
Select
soft key.
4. Press the
Up
or
Down
key to highlight the key to
which you want to assign a shortcut.
5. Press the
Select
soft key.
6. Press the
Up
or
Down
key to choose the option
you want to assign as a shortcut.
7. Press the
Select
soft key.
8. Press the
Clr
key one or more times to return to the
idle display.
1. Open the
General
settings menu using the steps in
“Accessing the General settings menu” (page 150)
2. Press the
Up
or
Down
key to highlight the
LED
signal
option.
3. Press the
Select
soft key.
Shortcuts
Select
Select
Select
LED signal
Select