Nortel Networks Nortel 4075 User Manual
Page 217
Advertising
Handset accessories
217
Uninstalling the belt clip
To uninstall the belt clip, perform the following steps:
1. Place the handset face down on a flat surface.
2. If you have a 4075 Handset, unscrew the belt clip, install the belt clip
compartment cover and tighten the screws.
If you have a 4027 or 4070 go to step 3.
3. Use the plastic tool to unlock the belt clip fastening.
The plastic tool is shipped in the box with the handset.
4. Slide out the belt clip.
5. Remove the plastic tool.
6. Install the belt clip compartment cover as shown in
Figure 20: Belt clip compartment cover
Belt clip
compartment
cover
Handset
Advertising