Netopia 3346-ENT - Manual (Page 16)

4-2 Getting Started Guide
Note: You can also use these instructions to configure other computers on your network to accept IP addresses
served by the Netopia 3346-ENT.
1. Go to the Start
Menu/Settings/Control
Panels and double click
the
Network icon. From
the Network components
list, select the
Configuration tab.
2. Select TCP/IP-->Your Network Card. Then select
Properties. In the TCP/IP Properties screen, select the IP
Address tab. Click “Obtain an IP Address automatically”.
3. Click on the DNS Configuration tab. Click Disable DNS.
DNS will be assigned by the router with DHCP.
4. Click OK in this window and the next window. When
prompted, reboot the computer.