Netopia 3346-ENT - Manual (Page 25)

Easy Setup 6-1
CCCChhh haaaapppptttteeeerrrr 6666
EEEEaaaassssyyyy SSS Seeeettttuuuupppp
This chapter describes how to use the Easy Setup Telnet screens on your Netopia 3346-ENT. After completing
the Easy Setup Telnet screens, your router will be ready to connect to the Internet or another remote site.
Easy Setup Telnet Screens
Using four Easy Setup Telnet screens, you can:
• Modify a connection profile for your router for the connection to your ISP or remote location
• Set up IP addresses and IP address serving
• Password–protect configuration access to your Netopia 3346-ENT
Accessing the Easy Setup Telnet screens
To access the Telnet screens, Telnet to the Netopia Router over your Ethernet network. See “Connecting
through a Telnet Session” on page 5-2 .
Note: Before continuing, make sure you have the information that your ISP or network administrator has given
you for configuring the Netopia Router.
The Netopia Router’s first Telnet screen, Main Menu, appears in the terminal window of the attached PC or
Macintosh computer when:
• The Netopia Router is turned on
• The computer is connected to the Netopia Router
• Telnet software is running and configured correctly