Netopia 3346-ENT - Manual (Page 20)

4-6 Getting Started Guide
3. In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in
the following table.
4. Close the TCP/IP or MacTCP control panel and save the settings.
5. If you are using MacTCP, you must restart the computer. If you are using Open Transport, you do not need
to restart.
Note: You can use these instructions to configure other computers on your network to accept IP addresses
served by the Netopia 3346-ENT.
You can also use these instructions to configure other computers on your network with manual or static IP
addresses. Be sure each computer on your network has its own IP address.
More information about configuring your Macintosh computer for TCP/IP connectivity through a Netopia
3346-ENT can be found in Technote NIR_026, “Open Transport and Netopia Routers,” located on the Netopia
Web site.
Option: Select/Type:
Connect via: Ethernet
Configure: Manually
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Router or Gateway address: 192.168.1.1
Name server address: Enter the primary and secondary name server
addresses given to you by your ISP
Implicit Search Path:
Starting domain name: Enter your domain name; if you do not have a
domain name, enter the domain name of your ISP