Operation, Additional information – Nautilus NB 2000 User Manual
> Moving your bike
To move your bike, carefully lift the rear end of the bike by pushing
down on the front of the handlebars. Steer the bike to another loca-
tion. Be gentle while moving the unit as any sharp impact directly or
indirectly to the computer can affect computer operation. (Fig. 7) To
move your recumbent, lift the back end of the unit and steer using the
stabilizer tube. (Fig.8) Be sure your bike is unplugged before moving.
Be careful when moving your bike as it is heavy
and awkward. If you do not feel comfortable moving the unit
by yourself, get help. The transport wheels are designed for
indoor use only and should not be used to move the unit over
rough surfaces such as concrete or asphalt.
> Leveling your bike
Your bike can be leveled to compensate for uneven surfaces.
To level the bike, raise or lower the two leveling bolts located
on the underside of the rear stabilizer by screwing them
in or out as needed. (Fig. 9)
Use a damp cloth to wipe your bike and computer free of sweat.
To avoid damaging the finish on your bike and
computer, never use a petroleum-based solvent when cleaning.
Avoid getting excessive moisture on the computer.
1000 COMPUTER DISPLAY