Net Optics PA-CU-AR - Manual (Page 9)

10/100 Port Aggregator Tap

Figure 3: Rear Panel
LED Indicators
PWR 1/ PWR 2:.Main.and.Redundant.Power ..If.the.Tap.is.deployed.with.
both.power.supplies,.both.LEDs.will.illuminate.when.the.Tap.is.plugged.in ..
If.an.LED.is.off,.this.indicates.that.the.corresponding.power.supply.is.not.
functioning .
Additional.Port.Aggregator.Tap.LEDs.are.located.in.the.upper.left.and.right.
hand.corners.of.the.RJ45.connectors.for.Port.A,.Port.B,.Port.1.and.Port.2.
(PAD-CU-AR.only) .
10/100 Indicator:.If.the.Port.is.set.to.10.Mbps,.the.LED.illuminates.or-
ange ..If.the.Port.is.set.to.100.Mbps,.the.LED.illuminates.green ..
Link/Activity Indicators: If.a.good.link.is.established,.the.LED.illu-
minates.a.steady.green ..If.there.is.current.activity.on.this.link,.the.LED.
flashes.
•
•
•
Power DC Jacks DIP Switch
1 3 4 5 6 7 8 2
/
.