Nikon LS8000 User Manual
Page 102
92
Curled Film
Follow the steps below to remove curl from medium-format film.
1
Slide the latch in the direction indicated by the arrow.
Latch
Film that has more than 10 mm of curl can not be used. Use the optional FH-869G glass-covered brownie
film holder or optional FH-869GR glass-covered rotating brownie film holder.
Do not leave the film in the holder for extended periods, as it may leave marks in the film.
3
After adjusting the position of the movable base, turn the locking screw clockwise to tighten it.
2
Slide the movable base outwards by pushing the grips lightly with your fingers to remove
curl from the film. Do not apply excessive force, as this could push the film out of alignment
(to prevent this, press the upper holder slightly downwards before sliding it outwards).