Nikon LS8000 - Manual (Page 140)

130
Caring for Holders
Storage
When not using the holders, remove them from the scanner. If you will not be using a holder
for an extended period, store it where:
• the temperature is between minus twenty and plus sixty degrees Centigrade (–4°F – +140°F)
• the humidity is between twenty and ninety percent (no condensation)
Cleaning
When cleaning the holder, do not use volatile cleaners such as alcohol or paint thinner. Use a
blower to remove dust. Clean dirt from the holder with a soft dry cloth, or dampen the cloth
with a neutral detergent to remove particularly stubborn stains, drying once cleaning is com-
plete.
Transport
Package the holder in the original packing materials for transport.
Cautions
Where the original packing materials are not available, package the holder carefully in materials
at least as shock resistant as the originals.
Work with the holder and scanner on a table or other flat, stable surface. The holder or scanner
could be damaged should either fall to the floor.