Nikon LS8000 - Manual (Page 40)

30
Confirming Device Registration (Windows XP)
After registering the scanner, confirm that the device is working normally as described below.
1 Turn the scanner on
Make sure that the scanner is connected and turned on.
2 Open the System Properties dialog
Select Control Panel from the Start menu, open Performance and Maintenance, and
click System.
3 Display the Device Manager
The System Properties dialog will be dis-
played. Open the Hardware tab and click
Device Manager….
4 Confirm that the scanner is listed under “Imaging devices”
If “Imaging devices” appears in the De-
vice Manager, click the “+” to its left to
view the imaging devices currently regis-
tered with Windows. Confirm that your
scanner is listed.
If the Scanner Is Not Listed
If the scanner is not listed under “Imag-
ing devices,” proceed to “Updating the
Device Driver (Windows XP)” (
32).